Some of the benefits of having your heating and air conditioning equipment regularly serviced are: - WQOW TV: Eau Claire, WI NEWS18 News, Weather, and Sports

Some of the benefits of having your heating and air conditioning equipment regularly serviced are:

  • Improved Efficiency & Operating Capacity
  • Lower Utility Costs
  • Prevention of Costly Breakdowns
  • Extended Equipment Life

CHECK LIST FOR RESIDENTIAL CHECK & CLEAN

GAS FURNACE

  • Change air filter (1" filter included - additional charge for specialty filters)
  • Remove & inspect/clean burners
  • Clean trap
  • Check termination
  • Check pressure switch lockout
  • Check blower wheels for cleanliness
  • Check condensate hoses & components for leaks
  • Check components for corrosion
  • Clean flame sensor

AIR CONDITIONER/HEAT PUMP

  • Clean condenser/clean debris out of bottom of condensing unit
  • Oil motor if needed
  • Check & tighten electrical connections
  • Check contacts on contactor
  • Check refrigerant pressure
  • Take temperature drop
  • Check refrigerant charge by superheat or sub-cooling method

OIL FURNACE

  • Change nozzle, oil filter cartridge, and air filter (1" filter included - additional charge for specialty filters)
  • Check flue pipe
  • Check chimney cleanout
  • Check and oil motors (blower & burner)
  • Check adjustment of electrodes
  • Clean heat exchanger
  • Check condition of combustion chamber
  • Check condition of burner coupling
  • Check venting of flue products
  • Check condition of flame retention head
  • Check flame and flame safety lockout

GAS WATER HEATER

  • Check pilot safety drop out
  • Check pilot positioning and flame
  • Clean corrosion from flame spreader if needed
  • Vacuum bottom pan
  • Check T-stat operation

POWER VENT WATER HEATER

  • Oil motor if needed
  • Clean burner
  • Check vent termination
  • Check pressure switch tubingV

ELECTRONIC AIR CLEANER

  • Clean electronic cells and pre-filters
  • Check electrical connections on power pack
  • Check condition of contact plates

AIR EXCHANGER

  • Clean heat recovery core
  • Clean filters
  • Clean trap
  • Oil motor
  • Check blower wheel for cleanliness

HUMIDIFIER

  • Check shut off valve
  • Clean pan
  • Clean float and check operation
  • Clean distributor
  • Change pad
  • Check humidistat operation

HOME CHECK AND CLEAN SALE EVERY APRIL - SEPTEMBER. CUSTOMERS RECEIVE REMINDER CARDS IN THE MAIL.

Kurth Sheet Metal Inc

4115 123rd St
Chippewa Falls, WI 54729-6732
Fax: 715-723-2127

Directions:

Located in the village of Lake Hallie between Chippewa Falls and Eau Claire. Go west on 40th Ave off of Business 53/Hwy 124. Then right on 123rd.

24 Hour Service
Phone: 715-723-2211


Operating Hours

Monday - Thursday
7:30AM - 5:OO PM

Friday
7:30 AM - 4:00 PM
Powered by Frankly